EN ISO 11393-2 Chainsaw Pants Certification Guide: Everything You Need to Know

EN ISO 11393-2 Chainsaw Pants Certification Guide: Everything You Need to Know

Introduction

Safety is of the utmost importance when operating a chainsaw. Chainsaw chaps or chainsaw trousers play a vital role in protecting chainsaw users from serious injury. However, not all chainsaw protective trousers are created equal. EN ISO 11393 certification ensures that chainsaw protective clothing meets strict safety standards. In this guide, we’ll take you through all the information you need to know about EN ISO 11393-2 certification for chainsaw chaps, protective trousers and other protective clothing.

What is EN ISO 11393?

EN ISO 11393 is an international standard that specifies requirements and test methods for protective clothing designed to protect against chainsaw cuts. It replaced the older EN 381 standard and provides more detailed and updated safety requirements.

The standard is divided into several parts, depending on the type of protective garment:

• EN ISO 11393-1: Test rig for testing resistance to cutting by a chainsaw

• EN ISO 11393-2: Performance requirements and test methods for leg protectors

• EN ISO 11393-3: Test methods for footwear

• EN ISO 11393-4: Performance requirements and test methods for protective gloves

• EN ISO 11393-5：Performance requirements and test methods for protective gaiters

• EN ISO 11393-6: Performance requirements and test methods for upper body protectors

For chainsaw protective pants and chainsaw chaps, the most relevant sections is EN ISO 11393-2

Why is EN ISO 11393 Certification Important?

Chainsaw operation involves a high-speed rotating chain that can cause serious injury in milliseconds. Chainsaw protective clothing certified to EN ISO 11393 is rigorously tested to ensure it can stop or slow the movement of a chain saw, minimizing the risk of injury.

The benefits of buying certified chainsaw pants are:

• Proven safety performance

• Chainsaw operator and employer confidence

• Compliance with safety regulations

• Better protection against legal liability

Protection Classes of Chainsaw Pants

According to the EN ISO11393-2 standard, chainsaw pants are divided into different protection levels according to the chainsaw speed they are tested to withstand.:

class1：20 m/s 

class2：24 m/s  

class3：28 m/s

Class 1 (20 m/s) is the most common level of protection used by professional foresters and landscapers, offering a balance of safety and comfort.

Types of Chainsaw Pants Under EN ISO 11393-2

There are three main types of chainsaw pants, depending on the design and protection range:

1. Type A

• Protects only the front of the legs, additional 5 cm protection on the left side of each leg

• Recommended for use by professional loggers who have received thorough training and instruction during normal forest harvesting work.

• Lighter and more breathable, ideal for professional loggers.

2. Type B

• Similar to Type A but for chainsaw chaps.

• Recommended for light to medium duty, such as home gardening.

3. Type C

• Provides full 360° protection around the legs.

• Recommended for tree climbers, arborists and workers who operate chainsaws at different angles,or for users who use chain saws infrequently or in special situations.

  

Testing Procedures for EN ISO 11393-2

During the certification test, the chainsaw protective trousers are subjected to simulated chainsaw impacts under controlled conditions. The test parameters include:

• Chain speed matched to protection level.

• Cutting position and angle

• Number of tests

Only products that pass these rigorous tests receive the EN ISO 11393-2 certification mark.

What to Look Out for When Buying Chainsaw Pants that Meet EN ISO 11393 certification

• Certification label: Verify that the pants carry the EN ISO 11393 certification mark.

• Protection level: Choose the right level of protection for your working conditions.

• Comfort fit: Choose lightweight, breathable materials for all-day wear.

• Size: Choose the right size for your body shape

• Durability: Reinforced fabric and high-quality stitching extend the life of the product.

• Customization options: For companies, OEM/ODM options allow for logo printing, custom colors, and designed packaging.

About Our Chainsaw Pants

Shanghai Weixi Protection Technology Co., Ltd. specializes in producing high-quality chainsaw protective trousers, chainsaw chaps, jackets and gloves that meet EN ISO 11393 certification. All products are tested to meet or exceed the protection standards of Class 1 (20 m/s). We provide:

• OEM and ODM services

• Customized logo and packaging options

• Ready to ship stock products

• Dropshipping

Conclusion

Choosing chainsaw protective trousers and chainsaw chaps that are certified to EN ISO 11393 is a key step to ensuring safe chain saw operation. Always verify the certification, protection level and manufacturer’s reputation before purchasing. If you need reliable, certified and customizable chainsaw protective clothing, please feel free to contact us for a quote or sample.